Universal wall formwork,
which will work on any construction site!
Wall Systems Production Coordinator
BAUFRAME is a very practical formwork, tested on thousands of construction sites, which in most cases can be used regardless of the availability of a crane. The key element of the system is a wedge lock, which greatly facilitates carpentry works. A wide range of sizes makes it possible to adapt the system to the majority of reinforced concrete geometries, and the hot-dip galvanized frame together with high-grade sheathing ensures long-term use.
BAUFRAME system is an ideal solution for medium and large construction sites, especially in the housing and office sector.
The BAUFRAME formwork system is a modern, technically advanced product of the highest quality, designed from scratch by BAUKRANE engineers.
The frame of each steel panel is made of a closed outer profile, 121 mm high and 20 mm wide, and an inner profile, 105 mm high and 25 mm wide.
The internal profiles have functional openings for connecting fittings. Steel frames are protected against corrosion with hot-dip galvanizing.
Each steel formwork frame of BAUFRAME system has an innovative solution in the form of steel profiles with parabolic openings for through-holes, which protect the sheeting against damage during assembly and disassembly of the formwork.
Through-holes in aluminium panels are secured with a ring made of durable and light aluminium alloy, which effectively protects the plywood – significantly increases durability of the sheathing and extends the time between its replacement.
High-quality plate sheathing
Sheathing is made of high quality birch plywood with a thickness of 15 mm, covered with phenyl film with a weight of 220g/cm2.
On a special order it is possible to build in a frame of PPL plywood covered with plastic (polypropylene).
Permissible pressure of fresh concrete mixture on the formwork is 60kN/m2.
BAUFRAME system panels can be built both horizontally and vertically. Thanks to the wide range of dimensions, the height of the formwork can be adjusted to any building height. However, it is necessary to pay attention to the speed of concreting and consistency of the concrete mix, as the permissible pressure of fresh concrete mix on the formwork structure is 60 kN/m2.
Due to the construction of the frame side profile and the wedge lock it is possible to connect the panels with a stepless height shift without any additional elements. It allows to adjust the formwork to every irregularity of the surface.
- panel widths: 25/30/45/50/55/60/65/75/90/120/180/240 cm
- panel heights: 90/150/270/300 cm
- universal panels: 70/90 cm
- inner corner: 30×30 cm
- articulated corner: 15 x 15 cm / 30 x 30 cm
- angle range: od 60° do 150°
- frame: 12 cm thick steel profile, fully hot-dip galvanized
- skin: high quality birch plywood 15 mm
- average weight: 65 kg / m2
- max. concrete pressure: 60 kN / m2
- compatibility: Bauframe-Alu, Bauschal, Rasto, MidiBox, RHiNO
- standard connectors: BAUKRANE Wedge Clamps
- assembly time: 0,3 – 0,5 h / m2
- panel widths:
- 25/30/45/50/55/60/65/75/90 cm
- panel heights:
- 90/150/270/300 cm
- universal panels:
- 70/90 cm
- inner corner:
- 30 x 30 cm
- articulated corner:
- 15×15 / 30×30 cm
- angle range:
- od 60° do 150°
- 12 cm thick steel profile, fully hot-dip galvanized
- high quality birch plywood 15 mm
- average weight:
- 45 kg / m2
- max. concrete pressure:
- 60 kN / m2
- Bauframe Alu, Bauschal, Rasto, MidiBox, RHiNO
- standard connectors:
- BAUKRANE wedge clamps
- assembly time:
- 0,3 – 0,5 h/m2